Flood Dr provides bespoke flood drying and water damage restoration services for residential and commercial properties across London. We are a one-stop-shop handling everything from initial emergency response through to full structural drying, reinstatement and a final remediation report.
Regardless of the size of the job – from a single escape of water to large-scale flood damage restoration – our state of the art drying equipment and technical knowledge means we can help in every scenario. Call 0208 528 3311 for a free quote.
COMPLETE DRYING SOLUTIONS
Mitigate the damage with a quick, fast and effective response from Flood Dr.
Regardless of the size of the job, with our state of the art drying equipment and technical knowledge, we can help you in every scenario. We specialise in the drying of layered constructions using negative and positive pressure systems. Where others failed, we succeed. From small residential claims to large and complex commercial projects, we do it all.
Our experts will come to you, assess the situation and provide you with our diagnosis; alongside recommendations containing further steps (if necessary).
We are certified by the British Damage Management Association and our technicians are Dewpoint Professional accredited. We hold CHAS accreditation and BSI membership and work directly with leading insurance companies. A full remediation report and certificate of dryness is issued on completion of every project.
Regardless of when your incident occurs, we are on-hand to help 24 hours a day. Call 0208 528 3311.
Our emergency response means we can mobilise and be with you within 2 hours across London. Early intervention is critical – water penetrates porous building materials to depths of over 20 centimetres in as little as 8 hours. The faster drying begins, the lower the cost and the less secondary damage occurs.
Our all-in-one solution means we manage the full scope of flood damage restoration – from emergency attendance and water extraction through to structural drying, decontamination, reinstatement and final reporting. You deal with one company throughout, simplifying the insurance claim process.
Traditional Drying
The most common type of drying method utilising refrigerant dehumidifiers and air movers. This drying system employs refrigerant dehumidifiers which capable of removing large amounts of water vapour from the air, in conjunction with air movers which are used to disturb the boundary layer on the surface of building materials. It works great in initial stages of the drying (depending on construction) however this method of drying has severe limitations especially in a modern building with floor/ceiling voids and wall cavities where moisture can be trapped.
Target Drying
Target drying utilises heat/energy to remove moisture from the subsurface of the building material. Dry air is pumped into the enclosure, which creates a microclimate with very low vapour pressure; wet building material will have a high vapour pressure due to high moisture content. Water vapour moves from an area of high vapour pressure to the area with low vapour pressure to reach a balance/equilibrium.
This drying method is useful when drying dense building materials; additionally we are focusing all energy on drying a specific area rather than the entire room/building.
Specialist Drying
Injection drying using negative and positive pressure systems to remove moisture from hard-to-reach areas such as wall cavities and sub-floor voids – often an alternative to strip-out, avoiding the need to open walls or lift floors.
High Capacity “Speed” Drying
For severely saturated properties or large-scale flood damage restoration projects, we deploy trailer-mounted desiccant units producing high volumes of hot, low-humidity air to dramatically reduce drying time.
